Baccara

Phone: +61 3 9729 3250   Email: sales@baccara.com.au

Flow Monitors & Controls

AW-Lake MX9000 Panel Meter

The MX 9000 Panel Meter is a versatile, multi-functional device that helps you track flow rate, total, limit, batch and ratio.

The unit is deal for any industrial flow measurement application where a simple, compact & easy-to-use remote flow monitor is required.

The standard unit has one channel, but the optional two channel version allows you to monitor dual flows, and display them in a number of ways: separately, as a sum, as a difference, or as a ratio of product A/product B.

SIKA VES Calorimetric Flow Monitor

Compact version

The flow monitor is easily screwed into the process pipe directly via a connection thread. As the measuring probe is available in two different lengths, a wide range of pipe sizes and wall thicknesses are covered.

At the compact version VES the flow sensor and the corresponding switching transducer form a single unit. This means that flow can be monitored directly at the point of measurement.

Function principle

The calorimetric flow monitor works on the principle of the detection of temperature differences. The cylindrical measuring probe contains two temperature sensors. These have optimum heat conducting contact with the medium and are thermally well insulated from each other. One sensor is heated with a constant electrical power while the other sensor is not heated and thus takes on the temperature of the medium. When the medium is not in motion the temperature difference between the two sensors stabilizes at a constant level.

The flowing medium cools down the heated sensor. The changing temperature difference between the two sensors depends on the velocity and is a parameter for monitoring the specified minimum flow rate. This signal is sent to a comparator which controls a transistor output signal.

With a potentiometer the output signal is set to the requested set point. When the flow rate fails to reach this limit the transistor activates the output signal. A six position LED array displays the proximity to the alarm point which has been specified.

Areas of Application include:

SIKA VE series calorimetric flow monitors are used to monitor flow rates with typical application areas such as:

  • Protection for pumps against dry running
  • Monitoring lubrication circuits
  • Cooling and heating circuits
  • Monitoring for leaks
VES Calorimetric Flow Monitor

SIKA VEG Calorimetric Flow Monitor

Separate version
The flow monitor is easily screwed into the process pipe directly via a connection thread. As the measuring probe is available in two different lengths, a wide range of pipe sizes and wall thicknesses are covered.

The flow sensor installed in the pipe is connected to the switching transducer by a connecting lead. The electronic unit has been designed for installation on a mounting rail. This means that several points of measurement can be monitored from a central location.

Function principle
The calorimetric flow monitor works on the principle of the detection of temperature differences. The cylindrical measuring probe contains two temperature sensors. These have optimum heat conducting contact with the medium and are thermally well insulated from each other. One sensor is heated with a constant electrical power while the other sensor is not heated and thus takes on the temperature of the medium. When the medium is not in motion the temperature difference between the two sensors stabilizes at a constant level.

The flowing medium cools down the heated sensor. The changing temperature difference between the two sensors depends on the velocity and is a parameter for monitoring the specified minimum flow rate. This signal is sent to a comparator which controls a transistor output signal.

With a potentiometer the output signal is set to the requested set point. When the flow rate fails to reach this limit the transistor activates the output signal. A six position LED array displays the proximity to the alarm point which has been specified.

At the compact version VES the flow sensor and the corresponding switching transducer form a single unit. This means that flow can be monitored directly at the point of measurement.

Areas of Application include:

SIKA VE series calorimetric flow monitors are used to monitor flow rates with typical application areas such as:

  • Protection for pumps against dry running
  • Monitoring lubrication circuits
  • Cooling and heating circuits
  • Monitoring for leaks
veg