Phone: +61 3 9729 3250 Email: sales@baccara.com.au
Pressure Switches
We have developed a new system to order your pressure switches. The new system is designed to reduce the confusion between different pressure ranges and different “P” ranges (eg. PDA, PEHA etc.).
Now all pressure switches begin with the letters PS, followed by codes for pressure, connection, switch, electronic connection, body, diaphragm and any other special requests.
If we don’t stock it, we will source it!
We now have 3 main ranges of pressure switches. They are high quality and designed for a range of pneumatic and hydraulic applications.
We carry a wide range of switches to cover most applications. See below for an updated list of our inventoried switches. If your required switch is not listed, please don’t hesitate to contact us as we can source it.
Low Range Pressure Switches
With ranges varying between 0.04-10 bar. The majority of these switches have a maximum overpressure of 24 bar, however we do stock some heavy duty low range pressure switches for large spikes in system pressure.
See here for a list of our current inventoried pressure switches.
If your required switch is not listed here, please let us know and we can source it for you or find an alternative.
NPT conversions available.
Please contact us for data sheets on individual switches.
Medium Range Pressure Switches
With ranges varying between 1-120 bar. These pressure switches have a high maximum overpressure to withstand high pressure systems.
See here for a list of our inventoried pressure switches.
If your required switch is not listed here, please let us know and we can source it for you or find an alternative.
NPT conversions available.
Please contact us for data sheets on individual switches.
High Range Pressure Switches
With ranges varying between 17-400 bar. These pressure switches have a high maximum overpressure to withstand high pressure systems.
See here for a list of our inventoried pressure switches.
If your required switch is not listed here, please let us know and we can source it for you or find an alternative.
NPT conversions available.
Please contact us for data sheets on individual switches.
PJDA Differential Pressure Switch
Field Adjustable
Inline Mounting
Compact Size
Dual Diaphragms
Differential from 10 – 50 psi (.7 to 3 Bar)
System Pressures to 500 psi (35 Bar)
The PJDA differential pressure switch represents a breakthrough in compact, low system pressure differential switches. The sensing diaphragms only operates when the difference between the High and Low rises or falls to the adjusted conditions.
The set point can either be factory set or field adjustable through the low pressure port. The adjustable range is dependent upon the spring rate which is factory installed.
Standard features of the differential switch include a 5 amp snap action micro-switch and SPDT circuit (3 wire). The electrical connection is DIN 43650A either with a cable connection or 1/2in. conduit.
Optional ports and diaphragm materials are available on request.
G75-DP-1 Digital Pressure Gauge Switch
Differential Pressure (DIF) and Set Pressure (SET)
2 ft/60 cm cable plus 4 wires
2″ (inch) 52mm diameter
Internal memory to retain “Set-up data” at power down
4 Modes: Auto, Manual, PSI/BAR Selection, Zero Set
5 Modes: Auto, Manual, Set Pressure or set time for automatic filter backflush
Differential Switch Type 604
The type 604 pressure switch is used as a Δp flow switch in
ventilation ducts for the control of filters and fans, and in
primary and secondary control systems for the control of air
dampers.
The 604 pressure monitoring switches are also ideally suited
to protect heating coils from overheating and for monitoring
industrial air cooling circuits.
PSP/5/12 Water Pump Control
Compact Series – Adjustable or Factory Set
Two ranges 15/75 and 30/175 psi.
Nitrile Rubber Diaphragm
Overpressure to 225 psi (15 Bar)
Housing Material ABS Plastic and Steel
The PM/5 – PM/12 Water Pump Control Pressure Switches offer accurate control at a reasonable price.
The single port switch has a mechanical life which is rated at 1,000,000 cycles at 0 to 50 psi. LSP Water Pump Control
SPP-974 Air Filter Differential Indicator
Inline Mounting
Compact Size
Differential from 0 – 12 psi (.0 to .75 Bar)
System Pressures to 300 psi (20 Bar)
The SPP-974 differential pressure Indicator is ideal for the monitoring of Air filters. SPP-974 Air Filter Differential Indicator
This simple differential indicator has set range in green and red . Green from 0 > 350 mbar (5psi) Red 350 > 500mbar (7psi) indicating dirty filter .
a simple red green bar indicator is also available. .
Optional ports and pressure ranges are available on request
PSC/12 Air Compressor Control
Compact Series – Adjustable or Factory Set
Nitrile Rubber Diaphragm
Overpressure to 225 psi (15 Bar)
Housing Material ABS Plastic and Steel
The PSC/12 Air Compressor Control Pressure Switch offers accurate control at a reasonable price.
The switch has 4 ports and includes as standard, a Manual Shutoff Valve with a readily accessible On/Off button.
The mechanical life is rated at 1,000,000 cycles at 0 to 100 psi. PSC/12 Air Compressor Control
